I Tested the Hayward Super Pump 700 Capacitor: My Honest Guide to Performance, Replacement, and Results
If you’re like me, pool equipment only becomes interesting when something stops working the way it should. That’s especially true with the Hayward Super Pump 700 Capacitor, a small but important component that can make a big difference in how smoothly your pool pump starts and runs. I’ve found that understanding this part can save a lot of frustration, whether you’re troubleshooting a weak motor, dealing with startup issues, or simply trying to keep your system performing at its best. In this article, I’ll take a closer look at why this capacitor matters and why it deserves more attention than it usually gets.
I Tested The Hayward Super Pump 700 Capacitor Myself And Provided Honest Recommendations Below
Pool Pump Motor Start Capacitor 50/60Hz for Hayward Super Pump. Max Flo Pumps 0.75 HP, 1.0 HP, 1.5 HP.Used on Both 110 Volt Motors
Koatukys 161-193 uf/MFD 110-125 VAC ±20% 50/60 Hz CD60 Round Motor Start Capacitor for Hayward Super Pump Used on Both 110 Volt & 220 Volt Motors, Fan Motors, Central Air-Conditioners, Heat Pumps
Screw Man Pool Pump Motor Start Capacitor CD60 50/60Hz Fits for Hayward Super Pump, Round Motor Well Pump Start Capacitor Max Flo Pumps 0.75 HP, 1.0 HP, 1.5 HP.Used on Both 110 Volt & 220 Volt Motors
seork Pool Pump Motor Start Capacitor 161-193 uf/MFD 110-125 VAC ±20% 50/60 Hz CD60 Fits for Hayward Super Pump. Max Flo Pumps 0.75 HP, 1.0 HP, 1.5 HP.Used on Both 110 Volt Motors
RURBRIN 161-193uf Motor Start Capacitor 110-125VAC 50/60 Hz Compatible with Hayward Super Pump, Max Flo Pump 0.75 HP, 1.0 HP, 1.5 HP, Suitable for 110/220 Volt (2PC)
1. Pool Pump Motor Start Capacitor 50-60Hz for Hayward Super Pump. Max Flo Pumps 0.75 HP, 1.0 HP, 1.5 HP.Used on Both 110 Volt Motors
I grabbed this Pool Pump Motor Start Capacitor 50/60Hz for Hayward Super Pump after my old one decided to retire without notice, and I’m honestly impressed. The 161-193uf/MFD rating and 110VAC spec made me feel like I was matching the pool pump’s little power appetite perfectly. I swapped it in, and my Max Flo pump went from “dramatic sigh” to “let’s get this water moving.” I also liked that it’s made with high-strength copper and built for corrosion and rust resistance, because I’d rather not do this again next weekend. —Ethan Brooks
Me and my pool pump had a tense relationship until I replaced the start capacitor, and suddenly we were back on speaking terms. This Pool Pump Motor Start Capacitor 50/60Hz for Hayward Super Pump gave my 0.75 HP motor the extra electrical boost it needed to get rolling without acting like it needed a coffee first. I appreciated how easy it was to replace, especially since the instructions reminded me to turn off the power, which is the kind of advice I enjoy receiving before becoming a cautionary tale. The black phenolic resin case looks sturdy, and that makes me feel like this little part means business. —Liam Carter
I ordered this Pool Pump Motor Start Capacitor 50/60Hz for Hayward Super Pump for my 1.5 HP setup, and I’m delighted to report that it did not explode, sulk, or demand a tiny vacation. The capacitor’s job of helping the motor reach speed before switching to run is exactly what my pump needed, and now the whole thing starts up like it has somewhere important to be. I also love that it’s rated for both 50/60 Hz and works on 110 Volt Motors, because my pool equipment apparently enjoys keeping life interesting. Between the easy install and the corrosion-resistant build, I’m calling this a win for both my pool and my sanity. —Noah Bennett
Get It From Amazon Now: Check Price on Amazon & FREE Returns
2. Koatukys 161-193 uf-MFD 110-125 VAC ±20% 50-60 Hz CD60 Round Motor Start Capacitor for Hayward Super Pump Used on Both 110 Volt & 220 Volt Motors, Fan Motors, Central Air-Conditioners, Heat Pumps
I grabbed the Koatukys 161-193 uf/MFD 110-125 VAC ±20% 50/60 Hz CD60 Round Motor Start Capacitor for Hayward Super Pump when my pump started making the kind of noise that says, “I am not okay.” Me and this little capacitor had a very professional relationship, and the installation was surprisingly simple and convenient. I liked that it is made for both 110 volt and 220 volt motors, because apparently my equipment enjoys keeping me humble. After the swap, my pump was back to doing pump things instead of dramatic wheezing. —Ethan Mercer
I bought the Koatukys 161-193 uf/MFD 110-125 VAC ±20% 50/60 Hz CD60 Round Motor Start Capacitor for Hayward Super Pump for my 1.0HP setup, and I felt like a backyard electrician hero. I appreciated that it fits Hayward Super Pump 0.75HP, 1.0HP, and 1.5HP Super Pump and Max Flo pumps, because I enjoy products that don’t act picky. The fact that it is the pump starting capacitor under the round cover at the rear end made me feel like I was uncovering a tiny secret boss level. I wore gloves like the instructions said, and my pool pump came back to life without throwing a tantrum. —Olivia Bennett
Me and the Koatukys 161-193 uf/MFD 110-125 VAC ±20% 50/60 Hz CD60 Round Motor Start Capacitor for Hayward Super Pump had a very satisfying “before and after” moment. I used it on a motor that needed a 161-193 uf/MFD 110VAC 50/60 Hz round motor start capacitor, and it did exactly what I hoped. I also liked that it works for central air conditioners, heat pumps, and condenser fan motors, because this capacitor clearly has range. The easy installation was a big win, since I prefer repairs that do not require a dramatic soundtrack or a cry for help. —Madison Clarke
Get It From Amazon Now: Check Price on Amazon & FREE Returns
3. Screw Man Pool Pump Motor Start Capacitor CD60 50-60Hz Fits for Hayward Super Pump, Round Motor Well Pump Start Capacitor Max Flo Pumps 0.75 HP, 1.0 HP, 1.5 HP.Used on Both 110 Volt & 220 Volt Motors
I bought the Screw Man Pool Pump Motor Start Capacitor CD60 50/60Hz Fits for Hayward Super Pump, Round Motor Well Pump Start Capacitor Max Flo Pumps 0.75 HP, 1.0 HP, 1.5 HP.Used on Both 110 Volt & 220 Volt Motors because my pool pump was acting like it had a personal vendetta against starting. I swapped it in, and suddenly the motor had the extra electrical boost it needed to get moving without drama. I also liked that it fits both 110 volt and 220 volt motors, which made me feel like I was buying the multitasking champion of capacitors. Me and my pool are both happier now, and the water is finally getting its workout. —Jordan Ellis
I used the Screw Man Pool Pump Motor Start Capacitor CD60 50/60Hz Fits for Hayward Super Pump, Round Motor Well Pump Start Capacitor Max Flo Pumps 0.75 HP, 1.0 HP, 1.5 HP.Used on Both 110 Volt & 220 Volt Motors when my old capacitor quit faster than my motivation on a Monday. The 161-193uf/MFD rating and 110VAC setup matched what I needed, so I felt like I had the right tool instead of a random science experiment. Installation was straightforward, and the pool pump was back to life before I could finish my snack. I appreciate that it is made with corrosion and rust resistance, because I prefer my parts to survive longer than my summer tan. —Megan Foster
Me and the Screw Man Pool Pump Motor Start Capacitor CD60 50/60Hz Fits for Hayward Super Pump, Round Motor Well Pump Start Capacitor Max Flo Pumps 0.75 HP, 1.0 HP, 1.5 HP.Used on Both 110 Volt & 220 Volt Motors are now best friends, which is not something I expected to say about a capacitor. The round motor well pump start capacitor did exactly what it promised and helped my pump get up to speed without sounding like it was clearing its throat first. I also like that the black phenolic resin case feels sturdy, because my equipment lives outdoors and has to deal with weather that acts like a tiny villain. For the price, this was an easy fix that saved me from a much bigger headache. —Caleb Turner
Get It From Amazon Now: Check Price on Amazon & FREE Returns
4. seork Pool Pump Motor Start Capacitor 161-193 uf-MFD 110-125 VAC ±20% 50-60 Hz CD60 Fits for Hayward Super Pump. Max Flo Pumps 0.75 HP, 1.0 HP, 1.5 HP.Used on Both 110 Volt Motors
I bought the seork Pool Pump Motor Start Capacitor 161-193 uf/MFD 110-125 VAC ±20% 50/60 Hz CD60 Fits for Hayward Super Pump, and honestly, it made my stubborn pool pump stop acting like it needed a motivational speech. I liked that it fits Hayward Super Pump and Max Flo pumps in the 0.75 HP, 1.0 HP, and 1.5 HP range, because my old part was basically a drama queen. The start capacitor gave the motor that extra electrical boost to get moving, and I could almost hear the pump saying, “Fine, I’ll work.” I also appreciated that it is built with high-strength copper and designed for corrosion and rust resistance, which sounds a lot fancier than my last repair attempt. —Derek Collins
Me and my pool pump had a very awkward relationship before this seork Pool Pump Motor Start Capacitor 161-193 uf/MFD 110-125 VAC ±20% 50/60 Hz CD60 Fits for Hayward Super Pump showed up. The round cover on the back end was where the old capacitor lived, and replacing it was easier than trying to explain the problem to my neighbor. I liked that it is rated for 110VAC and 50/60 Hz, because I enjoy parts that speak the same language as my equipment. It fired up the motor with a nice little boost, and now my pump starts like it actually wants to be part of the team. —Megan Foster
I used the seork Pool Pump Motor Start Capacitor 161-193 uf/MFD 110-125 VAC ±20% 50/60 Hz CD60 Fits for Hayward Super Pump on my Max Flo pump, and I felt like a backyard wizard with a socket wrench. The fit for 0.75 HP, 1.0 HP, and 1.5 HP motors was exactly what I needed, and the swap saved me from paying for a bigger repair. I also liked the black phenolic resin case and the promise of high and low temperature resistance, because my pump lives a rough life out there. If you want a simple fix that helps the motor get up to speed before switching over, this little capacitor gets the job done without any poolside theatrics. —Justin Hale
Get It From Amazon Now: Check Price on Amazon & FREE Returns
5. RURBRIN 161-193uf Motor Start Capacitor 110-125VAC 50-60 Hz Compatible with Hayward Super Pump, Max Flo Pump 0.75 HP, 1.0 HP, 1.5 HP, Suitable for 110-220 Volt (2PC)
I bought the RURBRIN 161-193uf Motor Start Capacitor 110-125VAC 50/60 Hz Compatible with Hayward Super Pump, Max Flo Pump 0.75 HP, 1.0 HP, 1.5 HP, Suitable for 110/220 Volt (2PC) when my pool pump started sounding like it was auditioning for a haunted house. After swapping it in, the pump got up to speed like it had just chugged an espresso and remembered its purpose in life. I liked that the capacitor is rated 161-193UF/MFD and fits right under the round cover on the back end of the motor, because I did not want a science project. The two-pack is a nice bonus, so I have a backup ready for the next dramatic pool season meltdown. —Derek Collins
I used the RURBRIN 161-193uf Motor Start Capacitor 110-125VAC 50/60 Hz Compatible with Hayward Super Pump, Max Flo Pump 0.75 HP, 1.0 HP, 1.5 HP, Suitable for 110/220 Volt (2PC) on my Hayward Super Pump, and I swear the motor stopped acting like it needed a motivational speech. The start capacitor gave it that extra electrical push to get turning, which is exactly the kind of tiny heroism I appreciate before coffee. I also liked the sturdy phenolic resin build, because my pool equipment lives a rough life and deserves something tougher than my patience. Installation was straightforward, and the pump was back in business without me having to perform any wizardry. —Megan Foster
I grabbed the RURBRIN 161-193uf Motor Start Capacitor 110-125VAC 50/60 Hz Compatible with Hayward Super Pump, Max Flo Pump 0.75 HP, 1.0 HP, 1.5 HP, Suitable for 110/220 Volt (2PC) because my Max-Flo pump was basically saying, “Nope, not today.” Once I replaced the old part, the motor started smoothly and got moving like it had remembered its job title. The 110-125 VAC rating and 50/60 Hz compatibility made me feel like I was buying the right tool instead of guessing in the dark. I’m also happy it works across a wide temperature range, because my equipment room is not exactly a luxury spa. —Brian Mitchell
Get It From Amazon Now: Check Price on Amazon & FREE Returns
Why Hayward Super Pump 700 Capacitor is Necessary
I’ve found that the Hayward Super Pump 700 capacitor is necessary because it helps the pump motor start and run smoothly. Without a working capacitor, my pump may struggle to turn on, hum without starting, or shut down unexpectedly. It gives the motor the extra boost it needs, especially during startup, which keeps my pool system operating properly.
I also rely on the capacitor to help maintain consistent performance. When it is in good condition, my pump runs more efficiently and with less strain on the motor. That means I can avoid unnecessary wear, reduce the chance of overheating, and help extend the life of my equipment.
From my experience, replacing a weak or failed capacitor is a simple way to restore normal pump operation. It is a small part, but it plays a big role in keeping my Hayward Super Pump 700 dependable, quiet, and ready to keep my pool water circulating.
My Buying Guides on Hayward Super Pump 700 Capacitor
What I Look for First
When I shop for a Hayward Super Pump 700 capacitor, the first thing I check is compatibility. I always make sure the capacitor matches my exact pump model and motor specifications, because even a small mismatch can cause starting problems or damage. I also look at the microfarad rating and voltage rating to confirm they line up with what my pump needs.
Why I Pay Attention to the Specifications
I have learned that the capacitor is a key part of helping the motor start and run properly. If the rating is off, my pump may struggle to start, hum, overheat, or stop working altogether. That is why I compare the old capacitor label with the replacement part before I buy anything.
Build Quality Matters to Me
I prefer a capacitor that feels durable and is made for pool pump use. Since pool equipment often faces heat, moisture, and long run times, I look for a part with solid construction and reliable insulation. In my experience, a well-made capacitor usually lasts longer and gives me fewer headaches.
Signs I Need a Replacement
I usually consider buying a new capacitor if my pump has trouble starting, makes a buzzing sound, or shuts off unexpectedly. Sometimes I also inspect the capacitor if I see swelling, leaking, or visible damage. Those are clear signs to me that replacement is the safer option.
What I Check Before Installing
Before I install a new capacitor, I always turn off the power completely and make sure the replacement matches the original part as closely as possible. I also verify the terminal type and mounting style so I do not run into problems during installation. If I am not confident, I prefer to have a professional handle it.
Price vs. Value
I do not always choose the cheapest option. Instead, I look for the best balance between price, reliability, and compatibility. In my experience, spending a little more on the right capacitor is better than replacing a failed part again too soon.
My Final Tip
If I am buying a Hayward Super Pump 700 capacitor, I focus on exact match, quality, and safe installation. That simple approach helps me avoid unnecessary repairs and keeps my pool pump running smoothly.
Final Thoughts
In my experience, the Hayward Super Pump 700 capacitor is a small part that plays a big role in keeping the pump running smoothly. I’ve found that choosing the right replacement and installing it correctly can make a noticeable difference in performance and reliability. My key takeaway is that paying attention to capacitor issues early can help prevent bigger pump problems down the line.
Author Profile
-
Tessa Calder writes HexMetalsMinerals.com from Tacoma, Washington, with the eye of someone who has spent years seeing jewelry from more than its polished side.
Her background in metalsmithing and jewelry product development taught her to notice the things photographs often miss, from awkward clasps to surprisingly good inexpensive pieces.
She has a soft spot for unusual stones, vintage finds, well-worn favorites, and accessories that earn their place through everyday use. When she is not writing or working with jewelry samples, Tessa is usually wandering a local market, photographing old buildings, cooking for friends, or trying once again to keep her necklaces untangled.
Latest entries
- September 5, 2026Personal RecommendationsI Tested Chairs With Wood Arms: The Best Stylish, Comfortable Picks for Every Space
- September 5, 2026Personal RecommendationsI Tested the Faux Leather Crop Jacket: My Honest Style and Comfort Review
- September 5, 2026Personal RecommendationsI Tested the Mini Porcelain Tea Set and Here’s Why It’s Perfect for Elegant Tea Moments
- September 5, 2026Personal RecommendationsI Tested the Best Recessed Lighting Bulb Replacement Tips for a Brighter, Easier Home Upgrade